Holder 4.74 manual Special operating instructions, Stationary operation, 12 L

C 4.74

Operating instructions

Special operating instructions 1

Stationary operation

The vehicle can be used for stationary operation, for example, to drive a water pump via the PTO shaft.

ATTENTION

Place the vehicle n level ground in both di- rections.

-Attach the stationary equipment to the PTO shaft (1).

-Set the program switch to 0.

-Operate the parking brake.

DANGER

Before switching on the PTO, make sure no- one is standing in the vicinity of the vehicle and the rotating PTO shaft.

Bild_C232

Removal of hydraulic oil for stationary operation

When the vehicle is stationary, hydraulic oil can be removed, for example, for the operation of a hydraulic dump.

Max. quantity of oil removed 12 L

ATTENTION

Before starting to drive after stationary opera- tion, first check if the power steering is work- ing. Turn the steering wheel fully to the right and left several times to release air from the steering system.

149 443 73