Holder 4.74 manual Flow limiter for joystick, Toggle button for Float Position Button

C 4.74

Operating instructions

Operating the implements

Flow limiter for joystick

1Button for individual flow limitation for each individual joystick function.

-Turn on the main switch for working hydraulics.

The lifting and lowering speed of the power lift can be stored individually with the flow limitation.

-Operate the joystick (4) until the desired cylinder speed is reached, then press button (1).

This value is stored as the maximum speed and it applies for the full stroke of the joystick.

If the full oil flow is required again, proceed as follows:

-Move the joystick (4) as far as possible and press button (1).

The full oil flow is released for the full stroke of the joystick.

Toggle button for Float Position Button

2Button for setting the joystick button (3) to “float position of front power lift“

1 2 3

4

5 Bild_C212

-Press the button (2).

The button (3) is now also activated as float position button for the front power lift.

Its activation is indicated with two flashing LEDs.

NOTE

You can also toggle the float position on and off with button (3).

Its activation is indicated with the LED (5).

-Press the button (2) again to toggle the switch.

149 443 93