Holder 4.74 manual Secure the vehicle against rolling with chocks

C 4.74		Operating instructions
		Transport, hoisting, towing
	ATTENTION	1

If the parking brake can not be released due to a lack of pressure in the accumulator and pressure can not be built up on account of a failure of the engine or hydraulic system, re- move the brake cable on the hydraulic cylin- der so that the vehicle can be towed.

DANGER

Secure the vehicle against rolling with chocks.

CAUTION	2	1	Bild_C286
The brake cable is very taut - risk of injury.	3	4

-Remove the bolts (1) on the left and right side of the protective hull.

-Remove the protective hull (2).

-Remove the boot (3) on the right and push it back.

-Loosen the locknut (4).

-Fully remove the setscrew (5).

The parking brake may only be restored by an authorized workshop.

5

Bild_C287

149 443 133