Holder 4.74 manual Operating instructions

	Operating instructions		C 4.74
Operation
The vehicle is stationary.	1	2	3

-Set the fine control knob (1) to 0.

-Set the program switch (2) to range 3 or 4.

-Adjust the PTO rpm with the hand throttle (3).

NOTE

The engine speed must reach at least 1500 rpm as the control is only effective beginning at this speed.

NOTE

You can also switch ranges while driving.

Bild_C166

The ranges 3 and 4 provide a speed as required by the load on the PTO.This means that if, for example, the snow blower requires more power when meeting high resistance, the vehicle will drive more slowly. As the resistance decreases, the vehicle accelerates again to the previously selected driving speed. Driving range 4 is especially adapted for cer- tain applications.

-Release the parking brake.

-The driving speed is controlled with the fine control knob (1).

64 149 443