Holder 4.74 Trailers, towing, Operating the trailer hitch manually, attaching trailers

Operating instructions

Trailers, towing

C 4.74

Operating the trailer hitch manually, attaching trailers

-Put the trailer hitch (5) in the two lower holes provided on the adjustment rail (2) with the fastening pin (3) and secure the pins with the retaining clips.

Bearing load

ATTENTION

The bearing load must be at least 25 kg (4 % of the trailer load), while the maximum bearing load must not exceed 600 kg.

If the bearing load is underrun or exceeded when unloading the trailer, the load must be shifted so that the bearing load returns to the permis- sible range.

-Drive the vehicle in front of the trailer to be attached.

DANGER

The trailer must be secured against uninten- tional movement (rolling).

-Push the safety (1) down and pull the tow pin (6) out of the hitch (5).

12 3 4

6 5 Bild_C269

DANGER

Make sure no-one is standing between the vehicle and trailer.

-Drive the vehicle with the coupler head into the trailer tongue.

-Reinsert the tow pin and lock it.

-Connect the trailer lighting to the connector socket (4).

-Remove the wheel chocks from the trailers.

128 149 443