Holder 4.74 manual Instructions for the vehicle, Intended Use, Site of operation

C 4.74

Operating instructions

Instructions for the vehicle

This vehicle has received the type approval acc. to 74/150/ EEC after a safety inspection. The vehicle conforms to the EMC (Electromagnetic Compatibility) requirements of direc- tive 89/336/EEC. The regulations for exhaust gas identifi- cation and the noise emissions are observed. The vehicle must be registered and the licence plate must be attached at the front and rear.

Intended Use

The vehicle can be used for towing trailers and for mounting various implements. The maximum trailer load, which must not be exceeded, is stated on the identification plate. The transportation of persons is not allowed.

The vehicle is designed solely for the customary type of operation in farming and forestry, the upkeep of municipal facilities, including operation in winter.

The intended use also includes the performance of the speci- fied maintenance. The vehicle and its implements may only be used, serviced and repaired by persons familiar with this equipment and have been warned of possible risks.The ap- plicable safety regulations must be strictly observed, along with all other recognized rules regarding industrial health, safety at work and the highway traffic code.

Site of operation

The vehicle must be used in the open. Its operation on pub- lic roads is allowed. Observe the applicable regulations in your country for driving your vehicle on public roads.

Unintended applications

Any use not intended as described as above is an unin- tended use. HOLDER will not be responsible for any hazard which may result from unauthorized use. The manufacturer will also not be responsible for any resulting damages; these shall be solely borne by the user. The vehicle may not be used for any other purposes than those described in this manual. Do not carry persons on the load platform or on the implements.

149 443 5