Honeywell 7900 manual Network Cards

Network Cards

To see the network cards installed on the terminal,

1.Tap Start > Settings > Connections > Network Cards > Network Adapters tab.

2. In the list, tap on an adapter to review its settings. (Server-assigned IP addresses use DHCP.)

3. If you make a change on one of these tabs, tap OK. The following message appears:

4.You must perform a soft reset to update the registry; see Soft Reset (Warm Boot) on page 2-11. During the soft reset, the new registry entries created by the changes can be read by the applications that need them.

!	Do NOT perform a hard reset (see Hard Reset (Cold Boot) on page 2-11)after modifying an adapter here. Hard resets
	return the terminal to factory defaults, which means that any network adapter modifications are lost.

7 - 32 Dolphin® 7900 Series Mobile Computer User’s Guide