Honeywell 7900 manual To Remove Programs

The results appear on the screen.

To see specific settings or change a specific setting, tap on one of the tabs, make the change and tap OK to save it.

Remove Programs

The Remove Programs settings enables you to remove programs installed on the terminal. Use this setting to troubleshoot when you receive messages that the device is out of memory. The programs removed are removed from RAM memory. Any program (usually *.cab or *.dll files) stored in the Autoinstall folder (My Device > IPSM > Autoinstall) will re-install after the next hard reset.

For information about the Autoinstall process, see Let Autoinstall Run on page 2-9.

For information about the hard reset process, see Hard Reset (Cold Boot) on page 2-11.

To Remove Programs

1. Tap Remove Programs. In the list, select the program you want to remove.

Dolphin® 7900 Series Mobile Computer User’s Guide 7 - 15