Honeywell 7900 manual Using the Mounting Brackets

3. Secure the DIN Rail to a stable, flat horizontal surface.

Using the Mounting Brackets

A wall mount kit can be purchased separately. It contains two mounting brackets to secure both ends of the ChargeBase. Use the screws and the mounting brackets to mount the ChargeBase to a wall or other vertical surface. Each mounting bracket contains an open slot in the back to accommodate the connector cables.

The bottom panel of the ChargeBase contains rubber feet that hold it steady on a flat surface. We recommend that those rubber feet be removed with pliers prior to applying the mounting brackets to the bottom panel.

1.Secure the screws into the four screw slots on the bottom panel. Insert the heads into the round end and slide towards the narrow end until the screw is secure.

2.Attach the bottom panel to the two mounting brackets.

Washer/nut sets and screws in slots

Dolphin® 7900 Series Mobile Computer User’s Guide 15 - 5