Honeywell 7900 manual Opening the Client, Icon Indicators

____ Yes.

10. What is the name of the server?

This usually includes the server’s domain, for example: server.big_school.edu. _____________________________

Opening the Client

To access the client the first time, tap Start > Programs > Meetinghouse AEGIS Client.

After the Client has been activated, you can tap the icon in the lower left corner of the command bar.

Icon Indicators

The color of the icon indicates the status of the controlled ports.

Icon	Color	This color icon indicates that …
	Green	Authentication succeeded.
	Yellow	Authentication is in process.
	Red	Authentication failed.

If there is no yellow, red or green in the icon then either the ports are not being controlled by 802.1X, or there is no authentication activity on the controlled ports. The absence of yellow, red or green may also indicate that the network access server is not an 802.1X aware device.

Gray	The port is not in use or is disabled.
	Either the Client isn’t running, or the port is not bound to the 802.1X protocol.
	The port is associated, but there is no response to 802.11b packets.
Orange	If using WEP without 802.1x authentication, this will be the final state when the connection
	is complete. If using 802.1x authentication, it is either a transient condition or can indicate
	that attempts to authenticate have timed out as there was no response to 802.1X packets.
Blue	There is no 802.11b activity. The port may not be connected to an 802.1X-aware entity.

9 - 16 Dolphin® 7900 Series Mobile Computer User’s Guide