To Create a New Profile

In the Preferred Profiles section, tap the New button . A screen opens with two tabs windows: Network Profile and Authentication.

Network Profile Tab

FieldDescription

Network Name &Type

SSIDEnter an SSID, which is the Network Name. Check with your network administrator for Network Name (SSID).

TX Rate

Choose the transmit rate from the drop-down list - 1MB, 2 MB, Auto 1/2 MB, 5.5 MB, 11 MB, or Fully Auto.

 

The transmit rate is set to Fully Auto by default.

Type

From the drop-down list, select

 

Peer-to-Peer– This mode used for communication between two (or more) radio stations (cards) without

 

an AP.

 

Access Point (AP) – This mode is also called “Infrastructure” mode.

Chan

AP Search Threshold

Scroll to select a channel for communication.

Select Low Density (default), Medium Density, or High Density from the drop-down list and tap OK. AP search thresholds are used for wireless client roaming between APs. In general, the higher the density selected here, the easier your WLAN card roams between APs with the same SSID in the same network. Roaming also depends on the relative signal strength of the AP.

OK

Tap this button to save the profile or changes to the profile.

Cancel

Tap this button to close the window without saving or modifying the profile.

Note: The SSID, Type, TX Rate, and Channel fields are unchangeable in AP mode, whereas TX Rate and Channel fields can be changed in Peer-to-Peer mode.

Dolphin® 7900 Series Mobile Computer User’s Guide

9 - 7

Page 119
Image 119
Honeywell 7900 manual To Create a New Profile