Honeywell 7900 Headset Control, Headset Type, Telephone mono with mic, Mic Volume, Headset Volume

Headset Control

The Headset Control setting enables you to adjust audio settings while using a headset.

Headset Type

Stereo headphone Select this option if you are using a headset for audio output only. In this case, you need to use the microphone on the terminal (Microphone, page 3-2)for audio input; i.e., listen via the headset and speak into the microphone. These types of headsets usually contain two earpieces for stereo sound.

Tap OK to save your selection.

Telephone (mono with mic)

Select this option if you are using a headset that also contains a microphone. When this option is selected, you speak into the microphone on the headset and not the microphone on the terminal. These types of headsets usually have one earpiece for mono audio.

Tap OK to save your selection.

Mic Volume

These options enable you to adjust the audio level of the microphone. Normal is the default setting. If this is too loud for the listener, you can change the setting to Low.

These settings apply to the selected Headset Type. When you select Stereo headphone, the volume on the terminal’s microphone (Microphone, page 3-2)adjusts. When you select Telephone (mono with mic), the volume on the headset’s microphone adjusts.

Tap OK to save your selection.

Headset Volume

This slider enables you to adjust the speaker volume (audio output) of the headset. Move the slider from Mute to High depending on your preference. The volume adjusts automatically as you move the slider. These headset volume settings apply to both Headset Types.

Dolphin® 7900 Series Mobile Computer User’s Guide 7 - 5