Honeywell 7900 manual Connections Tab, Server-Assigned IP Addresses, Zero-Config Wi-Fi

Connections Tab

The Connections tab enables you to manage your network connections.

Icon	Tapping this icon…
Beam	Enables you to verify and adjust the infrared settings of the IrDA port; see Using Infrared on page 8-5.
Connections	Enables you to configure network connections.
	This is the connections manager; see Connections Tab on page 7-19.
Network Cards	Enables you to access the Wireless and Network Adapters tabs; see Network Cards on page 7-32.
Radio Manager	Enables you to power up and power down the radios installed on the terminal;
	see Radio Manager on page 4-6.

Other Icons on the Connections Tab

Other icons appear on this window if your terminal is configured with specific network software, protocols, and/or radios.

802.11b Settings	This icon appears only if an 802.11b radio and driver is installed on the terminal.
	Tapping this icon enables you to configure your 802.11b radio; see Wireless LAN Communications
	with 802.11b on page 9-1.
IrDA	This icon appears only if a Bluetooth radio and driver is installed on the terminal.
	Tapping this icon enables you to disable or enable the IrDA port; see Verify That the IrDA Port is
	Enabled on page 8-5.
uPhone GPRS	This icon appears only if a GSM/GPRS radio and driver are installed on the terminal.
	Tapping this icon opens the GPRS settings; see GPRS Settings on page 11-26.

Server-Assigned IP Addresses

Please note that all server-assigned IP addresses use Dynamic Host Configuration Protocol (DHCP).

Zero-Config Wi-Fi

Please note that the zero-config Wi-Fi feature of Windows Mobile is disabled on Dolphin 7900 terminals.

Dolphin® 7900 Series Mobile Computer User’s Guide 7 - 19