Honeywell 7900 manual To Select the Pre-Configured Gprs Settings

GPRS Settings

After subscribing to a GPRS network and installing your SIM card, you can load the parameters of your GPRS subscription into the terminal. However, some subscriptions load automatically when you install your SIM card. If the GPRS settings do not load automatically, you must enter them manually.

Because GSM/GPRS technology uses a network connection, you need to configure those settings in the Connection Manager (see Connections Tab on page 7-19). uPhone does include a pre-configured GPRS connection for Internet settings, but you can also configure GPRS settings for browsing the web via a VPN or Proxy Server.

Requirements

You must select or create GPRS settings prior to making a GPRS call for the first time. Make sure that you are not using ActiveSync when configuring the connection settings.

To establish a GPRS connection, you need to use the information from your network service provider. Given that there can be so many different configurations, such as VPN or Proxy Server connections, see Connections Tab on page 7-19for instruction about how to set up each kind of connection.

To Select the Pre-Configured GPRS Settings

1.Go to Start > System > Connections tab > uPhone GPRS. The GPRS Settings screen appears displaying the default GPRS settings.

The Current Profile drop-down list contains a number of pre-configured connection profiles.

2.If the profile associated with your account appears in the Current Profile list, select it. If your account profile does not appear in the list, you need to create one. For details, see To Add a GPRS Setting on page 11-27.

3.In the Details section,

•Type in the APN number and the IP address

•Select the Protocol

4.Tap OK to save.

Note: Select Reset security settings to reset the username and password for your profile; see To Add a GPRS Setting on page 11-27.

11 - 26 Dolphin® 7900 Series Mobile Computer User’s Guide