Honeywell 7900 manual Using the Dialler

Status Icons and Bubble Options

Icon	This icon means…	Tapping this icon displays this bubble:	Bubble Options
	This icon appears when	For a call going out	Tap Hide to close the bubble.
	there is a call coming in or		Tap End to end the call.
	going out.
	A different bubble displays
	for each circumstance.
	If the incoming call is a
	conference call, a different
	bubble displays.
		When a call is coming in, this bubble displays	If the caller is in the Phonebook,
		while the ringtone sounds.	the name displays. If not in the
			Phonebook, the caller’s number
			displays; if the number can’t be
			read, “no number” displays.
			Tap Answer to answer the call;
			this places any current call on
			hold.
			Tap Reject to reject the call.

Using the Dialler

The Dialler is the is the program that manages your GSM/GPRS cell phone calls.

To launch the Dialler, tap Start > Programs > uPhone > Dialler. The program launches and the uPhone Dialler screen opens:

Dialler screen

Signal Strength

Tap to send (make) a call or accept an incoming call

Tap to clear the Dialler

Tap * and # buttons for interactive voice systems; also

known as touchtones.

Three information lines: Network Operator -

name of service provider.

Number/Name - number/ name of dialed,

incoming, and outgoing calls.

Status - displays the status of the phone.

Tap to end a call

Phone keypad - tap the numbers to dial

Dolphin® 7900 Series Mobile Computer User’s Guide 11 - 5