Charging with Dolphin Peripherals

When the battery is installed in the terminal, you can insert the terminal into any one of the following peripherals to charge the main battery pack:

Dolphin 7900 HomeBase (see page 13-1)

Dolphin 7900 Mobile Base (see page 14-1)

Dolphin 7900 ChargeBase (see page 15-1)or the Dolphin 7900 Net Base

To fully charge the Li-ion battery before installing it in the terminal, use the

Dolphin 7900 QuadCharger (see page 16-1)

Auxiliary Battery Well of the Dolphin HomeBase (see page 13-5)

Step 4. Initialize the Mobile Computer

1.Power on the terminal. The decode LED lights and the scan LED blinks for approximately three seconds. Do NOT press any keys while the terminal is booting up.

2.The terminal initializes and the splash screen appears for a few seconds. The Build numbers indicate the software versions.

Build

8.XX

8.XX

8.XX

Bootloader Kernel Keyboard

3. The system performs a hard reset. When the display activates again, follow the instructions that appear.

Dolphin® 7900 Series Mobile Computer User’s Guide

2 - 7

Page 25
Image 25
Honeywell manual Charging with Dolphin Peripherals, Dolphin 7900 HomeBase see Dolphin 7900 Mobile Base see