Honeywell 7900 manual UPhone Configuration, Accessing, Tab Windows

uPhone Configuration

uPhone Settings enable you to establish the normal operating parameters for uPhone applications.

Accessing

You can access uPhone Settings two ways:

1.Go to Start > Settings > System tab > uPhone icon.

2.In the Dialler application, selecting Tools > Configuration.

3.The configuration utility opens displaying the General Tab (page 11-21).

Requirements

Because you will be adjusting network settings, the GSM radio must be enabled, and a SIM must be installed for it to open correctly. If not, you will receive a notification message when you try to open the control panel.

If the radio is enabled and a SIM installed, the following message displays while the system accesses the network:

“Settings on the Network are being accessed. Please wait…”

If there is no response from the network within 60 seconds, this message times-out and the control panel closes. Otherwise, the uPhone Settings screen displays; the General tab appears first by default.

Tab Windows

uPhone Settings consists of five tabs: General, Network, Divert, Bar, Messaging, and Other.

Tapping OK accepts any changes and exits the uPhone Settings.

11 - 20 Dolphin® 7900 Series Mobile Computer User’s Guide