Mounting the Dolphin Mobile Base

There are three items you use to mount the Dolphin Mobile Base: the ball joints on the both the back panel and the ball joint connector, the mounting bracket, and the turnscrew.

Latch - securing the terminal

Turnscrew

Mounting Bracket

Ball Joint

Connector

Turnscrew

The turnscrew is located on the top of the bracket. Rotate the turnscrew to secure or loosen the ball joint slots.

Mounting Bracket

The bracket contains the turnscrew and two slots - one for the ball joint on the back panel and one for the ball joint connector. Both ball joints are inserted into a slot and secured with the turnscrew.

Ball Joint Connector

The ball joint is what you attach to the mounting surface. It is comprised of a ball joint and flat disk. The disk contains drill holes you use to secure the Mobile Base to the mounting surface.

14 - 6

Dolphin® 7900 Series Mobile Computer User’s Guide

Page 244
Image 244
Honeywell 7900 manual Mounting the Dolphin Mobile Base, Turnscrew, Mounting Bracket, Ball Joint Connector