Honeywell 7900 manual Enabling Radios and Radio Combinations, Disabling Radios

Enabling Radios and Radio Combinations

Note: To successfully enable a radio, both the hardware module and the software driver must be installed on the terminal.

If multiple radios are installed in your terminal, you must enable the radio combination and not each individual radio. To enable a radio or radio combination, select the radio in the Radio Modes list and tap Apply.

The radio drivers are enabled and disabled (if necessary) in the proper sequence. For example, if the radio enabled is Bluetooth Only and you try to switch to 802.11b Only, after Apply is tapped, the Radio Manager disables the Bluetooth radio first, then enables the 802.11b radio.

Disabling Radios

To disable all radios, select None and tap Apply.

Dolphin® 7900 Series Mobile Computer User’s Guide 4 - 7