Verify That Beam Settings Are Set to Receive

The Beam Settings must be set to receive for the terminal to receive data from other infrared devices. To verify, tap Start > Settings > Connections tab > Beam. The Beam Settings window should appear as follows:

Sending and Receiving

To send or receive, the IrDA ports of both devices - whether it’s two terminals, or a terminal and a host device - must be aligned with each other and within a close range. The maximum data-transfer speed is 115 Kbps.

Sending

1.Align the IrDA ports.

2.Open the program where you created the item you want to send and locate the item in the list. You can also beam files, but not folders, from File Explorer.

3.Tap and hold the item. A pop-up menu appears.

Pop-up menu

Selected item

4. Select Beam File. The information begins transmitting to the other device.

Receiving

1.Align the IrDA ports.

2.Have the owner of the other device send the information to you.

3.Your terminal automatically begins receiving it.

To initiate a receive manually, tap the Receive an incoming beam link.

8 - 6

Dolphin® 7900 Series Mobile Computer User’s Guide

Page 110
Image 110
Honeywell 7900 manual Verify That Beam Settings Are Set to Receive, Sending and Receiving