Honeywell 7900 manual Using the Dialer, Enable File Sharing

Enable File Sharing

1.Tap on the Bluetooth icon. In the pop-up menu, tap Transfer via Bluetooth > Enable File Sharing.

2.The Enable File Sharing status screen appears. Your mobile computer waits two minutes for the remote device to connect.

3.After successfully connecting to the remote device, the screen report Connected.

4.If two minutes passes before you connect, tap Wait Again.

5.File sharing is enabled until you end it by tapping Cancel.

Using the Dialer

This section explains how to assign a dialing prefix and use the Dialer to dial a number directly from your Contacts list. The Dialer makes it quick and easy to perform dial-up networking.

Note: The Dialer has been verified to work with Nokia and Ericcson phones and is known not to work with the Motorola 270c, NTT Docomo Paldio 633S or Sony au C413S phone. Results may vary with other phones that are not listed as being supported by the Bluetooth system.

Assign a Dialing Prefix

If you have not already assigned a dialing prefix during the install process, you can do so by following these steps:

1.Go to Start > Settings > System tab. Tap on Dialer.

2.Select the appropriate Dialing Prefix, then tap OK.

Using the Dialer

1.To use the dialer, the mobile computer must already be connected to the Bluetooth phone. You can use the Get Connected! Wizard to do this. Also, the Bluetooth phone must be selected as your favorite.

2.Go to Start > Contacts.

10 - 22 Dolphin® 7900 Series Mobile Computer User’s Guide