How to operate memory cooking

After having finished memory programming, just press the NUMBER buttons of the memory number you want to select. The oven will automatically start heating according to the pre-programmed cooking time and power level.

1.Make sure the oven is plugged into a properly earthed electrical outlet and “ON” appears in the display window.

2.Open the door.

The oven lamp will be turned on.

3.Put the food into a suitable container, place it in the centre

of the oven and then close the door securely. Result : The oven lamp will go off.

4.Press NUMBER buttons.

Result : The selected memory program automatically starts heating. But, NUMBER buttons 1, 2, 3 operate after 2 seconds.

How to operate double quantity button

1.Press the DOUBLE QUANTITY button.

2.Press the desired memory NUMBER buttons.

Result : Cooking time which was multiplied by the preset factor appears in the display and cooking starts with time digits counting down.

You don’t need to press the START button to start heating.

Double quantity button programming

1.Hold down CANCEL button and then press the DOUBLE

QUANTITY button. Hold together for 2 seconds.

2.Select desired program code by using NUMBER buttons.

3.Press NUMBER buttons to set the magnification factor

within the range from 1.00 to 9.99.

4.Press the START button.

Default factor is 1.65 preset from the manufacturer for increasing the cooking time. Make sure that you set a correct factor between 1.00 and 9.99 for each memory code number.

Press button to exit the programming mode.

Though you can successfully set a double quantity factor whose setting might result in excess of the maximum time allowed for each power level, the oven does not operate exceeding the maximum time.

03 OV UEN SE

English - 19

CM1529A-1_XEU_DE68-04030B-03_EN_160629.indd 19

 

 

2016-06-29 �� 5:31:34