Multi-stage

1.Hold down PROGRAM LOCK and then press PROGRAM button. Hold together for 2 sec.

Result : PROG indicator appears in the digital display.

2.Press appropriate NUMBER buttons for the desired memory number.

Result : Selected memory program code appears below the PROGRAM indicator.

3.Select power level by pressing the POWER LEVEL SELECTOR button or DEFROST SELECTOR button. Result : Default power level HIGH appears in the

display at first press of the POWER LEVEL SELECTOR button.

4.Press NUMBER buttons to set the cooking time.

5. Repeat steps 3 and 4 for II or III stage memory programming.

6.Hold down PROGRAM LOCK and then press PROGRAM button. Hold together for 2 sec once again.

Result : PROG indicator and memory number indicator blink 3 times in the digital display with a beep sound. And then the display goes blank.

7.When you want to program more, repeat the procedures above again.

Be sure to press the buttons firmly.

Press the POWER LEVEL SELECTOR button or DEFROST SELECTOR button one or more times until you get the desired power level.

The maximum time according to each cooking power level can be referred to in the title “Power Levels and Time Variations” on page 15. The NUMBER buttons will not operate or respond when you press a cooking time exceeding the maximum value. It is not possible to set a cooking time for longer than the maximum time allowed on the chosen program. It is advisable to press CANCEL button and to enter a new power level and cooking time.

Be sure to press the buttons firmly in the right position.

CAUTION

Memory programs are available up to 30 items. Make sure the unit is properly programmed.

After programming is finished, all you have to do for memory cooking is to press the NUMBER buttons. Then the selected memory program automatically starts cooking.

You can not set up the same POWER LEVEL or DEFROST. It operates as setting up sequence.

English - 18

CM1529A-1_XEU_DE68-04030B-03_EN_160629.indd 18

 

 

2016-06-29 �� 5:31:34