When all time is elapsed, the end of cycle Beep Tone will sound 4 times and all heating will stop.

The oven lamp will go off. For 1 min, the display shows ‘0‘ and the cooling fan will keep working in order to cool down the interior parts. During the time, the fan will not stop even when you open the door. 1 min later it will stop. Food may be removed from oven whilst the fan is still running.

During the time, the fan will not stop even when you open the door. 1 min later it will stop and “ON” appears again. Food may be removed from oven whilst the fan is still running.

Whilst in a heating cycle, one press on CANCEL button stops the oven. At this time, the Power Check Indicator “ON” starts blinking and goes off when the CANCEL button or START button is pressed again.

You can restart it by pressing the START button or a second press on CANCEL button will cancel the selected program. While NOT in a heating cycle, one tap on CANCEL button cancels the selected program.

You can press +20sec button one or more times in order to add the cooking time by 20 seconds. But you can not exceed the maximum time per power level allowed for power level selected.

When you first plug in the power cord, the oven beeps once and all the indicators show for 5 sec in the display window.

When heating cycle is completed and you open the door, the oven lamp automatically turns on and goes off 1 min later.

When you open the door whilst in a heating cycle, the oven stops operating and the oven lamp automatically turns on for 1 min and goes off 1 min later. If you leave the oven door open for more than 1 min, the oven beeps once every minute and after 5 min the power source check indicator ‘ON’ appears in the display window.

Multi-stage cooking

1.Select the desired power level by pressing the POWER LEVEL SELECTOR button or DEFROST SELECTOR button.

Result : The selected power level will be displayed in the

display window.

2.Set the desired heating time by pressing the NUMBER buttons.

Result : The selected time is displayed in the display window.

3.Repeat steps 1 and 2 for II or III stage memory programming.

4.Press the START button.

Result : The oven lamp and cooling fan will be turned on. The oven will automatically start heating according to pre-programed cooking time and power level. (I stage g II stage g III stage). The time on digital display will count down.

The maximum time according to each cooking power level can be referred to in the title “Power Levels ans Time Variations” on page 15. The NUMBER buttons will not operate or respond when you press a cooking time exceeding the maximum value. It is not possible to set a cooking time for longer than the maximum time allowed on the chosen program. It is advisable to press CANCEL button and to enter a new power level and cooking time.

You can not set up the same POWER LEVEL or DEFROST. It operates as setting up sequence.

English - 14

CM1529A-1_XEU_DE68-04030B-03_EN_160629.indd 14

 

 

2016-06-29 �� 5:31:32