5)Disconnect the bin control at the
6)Check for continuity across the bin control leads. When calling for ice, the bin control proximity switch should be closed. If open, replace the bin control. Activate the bin control actuator (press the actuator in), check for continuity across the bin control leads. The bin control proximity switch should be open. If closed, replace the bin control.
7)Reconnect the
6. SWITCHES
Two different control switches are used for operation. They are located on the right side of the control box which becomes accessible when the front louver is removed. The upper is the control switch, and the lower is the service switch.
[a] CONTROL SWITCH
This switch is used to place the machine into one of three modes: “OFF” (center position), “ICE” (upper position), and “SERVICE” (lower position).
[b] SERVICE SWITCH
When the control switch is in the “SERVICE” position, the control switch supplies power to the service switch and the machine is in service mode. The service switch has three positions: “DRAIN”, “CIRCULATE”, and “WASH”. See the information below for details of each function.
Note: 1. When the service switch is activated, power is supplied to the water pump in all three positions.
2.When the control switch is in the “OFF” position or in the “ICE” position, the service switch has no power and can be left in any position.
a)DRAIN
This machine utilizes a
24
