16. BIN CONTROL SWITCH
1)Remove the water tank (see “19. WATER TANK”). The bin control switch is located as shown below when viewed from the front.
Bin Control Switch
Fig. 13
2)Remove the top panel and the rear panel.
3)Disconnect the connector of the bin control switch lead (black) covered with a silicone hose and remove the lead wire from the grommet.
4)Loosen the thumbscrew on the right side.
5)Remove the thumbscrew on the left side. Shift the bin control switch to the left to remove.
6)Refit the removed parts in the reverse order of the removal procedure.
7)Plug in the icemaker or connect the power source.
Shift to the left and remove
Remove Loosen
Fig. 14
63