HP 16500B manual Contents

Contents

1General Information

Accessories 1–2 Specifications 1–3 Characteristics 1–3 Recommended Test Equipment 1–6

2Preparing for Use

To inspect the logic analysis system 2–2
To apply power 2–3
To operate the user interface 2–3
To set the line voltage	2–4
To degauss the display	2–5
To clean the logic analysis system		2–5
To test the logic analysis system		2–5
To install modules 2–6
To install the HP 16500L interface module 2–7
To connect the HP 16501A Expansion Frame 2–9
To connect an external monitor 2–10

3 Testing Performance

To perform the power-up tests 3–3

To perform the self-tests 3–4

4 Calibrating and Adjusting

To prepare the instrument	4–3
To access the test patterns	4–4
To adjust geometry 4–5
To adjust focus, landing, and convergence 4–6
To adjust white balance 4–13

5 Troubleshooting

To use the flowcharts 5–2
To check the power-up self-tests	5–18
To run the self-tests 5–19
To check the video signals 5–22
To check the power supply LEDs	5–23

To check the power supply voltages	5–24
To test the flexible disk drive voltages		5–25
To test the hard disk drive voltages	5–27
To test the expansion frame interface		5–29

v