To copy a blurred document from the control panel

1.Make sure you have paper loaded in the input tray.

2.Load your original print side down in the document feeder tray.

3.In the Copy area, press Copy Menu repeatedly until Enhancements appears.

4.Press until the Text setting appears.

5.Press START COPY Black or START COPY Color.

If any of the following occur, turn off Text enhancement by selecting Photo or None:

Stray dots of color surround some text on your copies

Large, black typefaces look splotchy (not smooth)

Thin, colored objects or lines contain black sections

Horizontal grainy or white bands appear in light- to medium-gray areas

Enhance light areas of your copy

You can use Photo enhancements to enhance light colors that might otherwise appear white. You can also use Photo enhancements to eliminate or reduce any of the following that might occur when copying with Text enhancements:

Stray dots of color surround some text on your copies

Large, black typefaces look splotchy (not smooth)

Thin, colored objects or lines contain black sections

Horizontal grainy or white bands appear in light- to medium-gray areas

To copy an overexposed image/embedded picture from the control panel

1.Make sure you have paper loaded in the input tray.

2.Load your original print side down in the document feeder tray.

3.In the Copy area, press Copy Menu repeatedly until Enhancements appears.

4.Press until the Photo enhancement setting appears.

5.Press START COPY Color.

Cancel a copy job

To stop copying, press Cancel on the control panel.

Cancel a copy job

43

Page 47
Image 47
HP 3100 manual Enhance light areas of your copy, Cancel a copy job, To copy a blurred document from the control panel