3. Remove the print cartridge. Hold the

 

 

print cartridge by the green top with the

 

 

"nose" pointed upward. Place two drops

 

 

of clean water on the gold rectangle on

 

 

the "nose" of the print cartridge. After

 

 

60 seconds, gently remove the water

 

 

from the print cartridge with a lint-free

 

 

damp cloth. Then reinstall the print car`

 

 

tridge and try printing again. You may

 

 

need to print a few pages before the ink

 

 

resumes a continuous flow.

 

 

CAUTION: Do not clean the print

 

 

cartridge unnecessarily; it will shorten the

 

 

life of the print cartridge.

 

 

4. If the print quality remains poor, install

 

 

a new print cartridge. If the problem

 

 

persists, see "Getting Help" earlier in

 

 

this chapter.

I think the nozzles

 

Use the instructions in the previous

on my print

 

symptom, "Print cartridge has dried ink on

cartridge are

 

the "nose."

clogged.

 

 

The last page of

The HP OfficeJet is

Press the Load/Eject button or wait for a

my file wasn't

waiting to see if there is

few minutes and your last page will be

printed.

more data coming before

released. After five minutes has passed and

 

releasing the last page.

the HP OfficeJet has not received any more

 

 

data, the last page of your file will be

 

 

printed.

Parts of my

The Windows driver for

documents are

the HP OfficeJet has a

being clipped

minimum top margin of

when I print from

0.33 in. (8.4 mm) and a

my Windows

minimum bottom margin

application.

of 0.67 in. (17 mm).

Before you print your document, make sure the entire document is visible in the "Print Preview" of your Windows application. You may need to increase the bottom margin setting for your footer (e.g. from 0.5" to 0.7").

￿￿￿￿

Page 200
Image 200
HP 330, 350 manual Think the nozzles, On my print, Cartridge are, Clogged Last, My file wasnt, Printed