HP 350 Never answers a, Call, Eclipse Fax SE, Doesnt work on, You get, Message, LPT1, Is in use

2. Exit Windows.

I can print, scan,	You may have a different
and change	CAS installed. Only one
settings with the	CAS modem can be used
HP OfficeJet	on a PC.
Manager, but PC
fax either doesn't
work or works
strangely.

Remove (delete) the software for the other CAS modem.

The	Distinctive Ring is set to	See chapter 1 for instructions on turning off
HP OfficeJet	on, but you don't have	Distinctive Ring.
never answers a	distinctive ringing
call.	service.
Eclipse Fax SE	You may have previously	Remove (delete) the software for the other
doesn't work on	installed a CAS fax	CAS modem.
the PC.	modem that was not
	removed before Eclipse
	Fax SE was installed.
	Only one CAS modem
	can be used on a PC.
You get the	The HP OfficeJet printer	If you are using a data switch to run two
message, "LPT1	cannot access LPT1.	printers from a single LPT port, make sure
is in use."		that all HP OfficeJet activities are complete,
		and the HP OfficeJet Manager and Eclipse
		FAX SE are closed, before switching to
		another printer.
You get the	Your HP OfficeJet is	Turn your HP OfficeJet on by pressing the
message, "Printer	turned off or	"I" on the On/Off switch located on the left
not responding."	disconnected.	side of the machine's base. Make sure that
		the interface cable is connected. (See
		"Connect the Interface Cable for Printing" in
		the Installation Guide). Click Reconnect. If
		your HP OfficeJet was previously able to
		connect to the device, check that the cable is
		securely connected at both ends, the device
		is turned on, and "Ready" is displayed on
		the front panel. Check that any data switch
		in use is set to connect to the HP OfficeJet.
		Then click Reconnect.

Nothing	If the HP OfficeJet printer
happens when I	doesn't respond when you
try to print.	try to print, it may be set
	to the wrong port.

Run the Windows front panel, select Printers, select the HP OfficeJet, then click the Connect button. Select the port that is connected to your device. Do not select HP OfficeJet. Click OK, close Printers and the front panel, and try printing again. If you still cannot connect:

1.Close the HP OfficeJet Manager.

3.Turn the machine off, then back on.

4.Restart Windows.

5.Restart the HP OfficeJet Manager.

If your HP OfficeJet has never connected￿￿￿￿to the device, you may be using a cable, data switch, or centronics port that does not support bi-directional communications.