HP 375424-001 manual Closing the Setup Utility

Setup Utility

The “<F12> to boot from LAN” message that is displayed in the lower-left corner of the screen each time the notebook is started or restarted in Windows or restored from hibernation is the prompt for a Network Service Boot.

The “Press <ESC> to change boot order” message that is displayed in the lower-left corner of the screen each time the notebook is started or restarted in Windows or restored from hibernation is the prompt to change the boot order.

Closing the Setup Utility

You can close the Setup utility with or without saving changes.

■To close the Setup utility and save your changes from the current session, use either of the following procedures:

❏Press f10, and then follow the instructions on the screen.

– or –

❏If the Setup utility menus are not visible, press esc to return to the menu display. Then use arrow keys to select the Exit menu > Exit Saving Changes, and then press enter.

When you use the f10 procedure, you are offered an option to return to the Setup utility. When you use the Exit Saving Changes procedure, the Setup utility closes when you press enter.

■To close the Setup utility without saving your changes from the current session:

If the Setup utility menus are not visible, press esc to return to the menu display. Then use arrow keys to select the Exit menu > Exit Discarding Changes, and then press enter.

After the Setup utility closes, the notebook restarts in Windows.

Hardware and Software Guide 13–5