Removal and Replacement Procedures— Slim Tower (ST) Chassis

7.13Front I/O Devices

1.Prepare the computer for disassembly (Section 7.1).

2.Remove the computer cover (Section 7.5).

3.Remove the two screws that secure the front I/O device to the chassis 1.

4.Rotate the drive cage to its full upright position.

5.Disconnect the front I/O cable from the system board.

6.Push the front I/O device into the chassis 2 and snake the cable through the tunnel 3 to remove the device from the chassis.

To reinstall the front I/O device, reverse the removal procedure.

 

7–34

433611-001

Service Reference Guide, dx7300