HP 43361 manual 175

		POST Error Messages
POST Error Messages (Continued)
Screen Message	Probable Cause	Recommended Action
918-Front USB Not	Front USB harness has	Reconnect or replace front USB harness.
Connected	been detached or
	unseated from system
	board.

921-Device in PCI Express slot failed to initialize.

There is an incompatibility/problem with this device and the system or PCI Express Link could not be retrained to an x1.

Try rebooting the system. If the error reoccurs, the device may not work with this system.

1151-Serial Port A	Both external and internal	1.	Remove any serial port expansion
Address Conflict	serial ports are assigned		cards.
Detected	to COM1.	2.	Clear CMOS.
		3.	Reconfigure card resources and/or
			run Computer Setup or Windows
			utilities.
1152-Serial Port B	Both external and internal	1.	Remove any serial port expansion
Address Conflict	serial ports are assigned		cards.
Detected	to COM2.	2.	Clear CMOS.
		3.	Reconfigure card resources and/or
			run Computer Setup or Windows
			utilities.
1155-Serial Port Address	Both external and internal	1.	Remove any serial port expansion
Conflict Detected	serial ports are assigned		cards.
	to same IRQ.	2.	Clear CMOS.
		3.	Reconfigure card resources and/or
			run Computer Setup or Windows
			utilities.
1201-System Audio	Device IRQ address	Enter Computer Setup and reset the IRQ
Address Conflict	conflicts with another	in Advanced > Onboard Devices.
Detected	device.
1202-MIDI Port Address	Device IRQ address	Enter Computer Setup and reset the IRQ
Conflict Detected	conflicts with another	in Advanced > Onboard Devices.
	device.
1203-Game Port	Device IRQ address	Enter Computer Setup and reset the IRQ
Address Conflict	conflicts with another	in Advanced > Onboard Devices.
Detected	device.

Service Reference Guide, dx7300 433611-001 C–5