Removal and Replacement Procedures— Microtower (MT) Chassis

6.12Front I/O Devices

1.Prepare the computer for disassembly (Section 6.1).

2.Remove the access panel and rotate the computer so the system board is parallel to the table to make it easier to work on (Section 6.3).

3.Remove the front I/O panel assembly (Section 6.11).

4.Remove the two screws that hold the USB and audio port assembly in place 1.

5.Remove the I/O device assembly from the I/O panel by pushing it out of the housing 2.

To install the I/O devices, reverse the removal procedures and then reinstall the housing assembly.

 

Service Reference Guide, dx7300

433611-001

6–25