HP 43361 ALT, DEL, CTRL, Option, Description, Security Features Overview

Desktop Management

removable media boot capability, you can protect valuable data assets. Memory Change and Smart Cover Sensor alerts can be automatically forwarded to system management applications to deliver proactive notification of tampering with a computer’s internal components.

✎HP Embedded Security for ProtectTools, the Smart Cover Sensor, and the Smart Cover Lock are available as options on some systems.

Use the following utilities to manage security settings on the HP computer:

■Locally, using the Computer Setup Utilities. See the Computer Setup (F10) Utility Guide on the Documentation and Diagnostics CD included with the computer for additional information and instructions on using the Computer Setup Utilities. Some computers also have HP BIOS Configuration for ProtectTools, which is a Windows-based component of ProtectTools that allows administrators to configure BIOS security settings from within the running OS.

■Remotely, using HP Client Manager Software or System Software Manager. This software enables the secure, consistent deployment and control of security settings from a simple command-line utility.

The following table and sections refer to managing security features of the computer locally through the Computer Setup (F10) Utilities.

Security Features Overview

Option	Description
Setup Password	Allows you to set and enable setup (administrator) password.
	✎ If the setup password is set, it is required to change
	Computer Setup options, flash the ROM, and make changes
	to certain plug and play settings under Windows.
Power-On Password	Allows you to set and enable power-on password.
Password Options	Allows you to specify whether the password is required for
(This selection will appear only	warm boot (CTRL+ALT+DEL) (appears if a power-on
if a power-on password is set.)	password is set).
Pre-Boot Authorization	Allows you to enable/disable the Smart Card to be used in
	place of the Power-On Password.
Smart Cover	Allows you to:
	• Enable/disable the Cover Lock.
	• Enable/disable the Cover Removal Sensor.
	✎ Notify User alerts the user that the sensor has detected that
	the cover has been removed. Setup Password requires that
	the setup password be entered to boot the computer if the
	sensor detects that the cover has been removed.
	This feature is supported on some models only and will only
	appear if a Smart Card reader is attached to the system.
Embedded Security	Allows you to:

•Enable/disable the Embedded Security device.

•Reset the device to Factory Settings.

✎For more information about Computer Setup, see the Computer Setup (F10) Utility Guide. Support for security features may vary depending on your specific computer configuration.

Service Reference Guide, dx7300 433611-001 3–17