HP 43361 Enter, Option, Heading, one time, Description, CTRL+ALT+DEL, Shortcut to Temporarily Override Boot Order

Setup Utilities and Diagnostics Features

Heading	Option	Description
Storage	Boot Order	Allows you to:
(continued)		• Specify the order in which attached devices (such as a USB
		flash media device, diskette drive, hard drive, optical drive, or
		network interface card) are checked for a bootable operating
		system image. Each device on the list may be individually
		excluded from or included for consideration as a bootable
		operating system source.
		• Specify the order of attached hard drives. The first hard drive in
		the order will have priority in the boot sequence and will be
		recognized as drive C (if any devices are attached).
		✎ MS-DOS drive lettering assignments may not apply after a
		non-MS-DOS operating system has started.
		Shortcut to Temporarily Override Boot Order
		To boot one time from a device other than the default device
		specified in Boot Order, restart the computer and press F9 when the
		monitor light turns green. After POST is completed, a list of bootable
		devices is displayed. Use the arrow keys to select the preferred
		bootable device and press Enter. The computer then boots from the
		selected non-default device for this one time.
Security	Smart Card	Allows you to enable/disable the Smart Card to be used in place of
	Options (some	the Power-On Password. This option only appears if a Smart Card
	models)	reader is attached to the system.
	Setup Password	Allows you to set and enables setup (administrator) password.
		✎ If the setup password is set, it is required to change Computer
		Setup options, flash the ROM, and make changes to certain plug
		and play settings under Windows.
	Power-On	Allows you to set and enable power-on password. The power-on
	Password	password prompt appears after a power cycle. If the user does not
		enter the correct power-on password, the unit will not boot.
		✎ This password does not appear on warn boots, such as
		CTRL+ALT+DEL or Restart from Windows, unless enabled
		in Password Options, below.
	Password Options	Allows you to:
	(This selection will	• Lock legacy resources (appears if a setup password is set)
	appear only if a
		• Enable/disable network server mode (appears if a power-on
	power-on
		password is set)
	password or setup
		• Specify whether the password is required for warm boot
	password is set.)
		(CTRL+ALT+DEL) (appears if a power-on password is set)

•Enable/Disable Setup Browse Mode (appears if a setup password is set) (allows viewing, but not changing, the F10 Setup Options without entering setup password)

✎Support for specific Computer Setup options may vary depending on the hardware configuration.

2–8 433611-001 Service Reference Guide, dx7300