HP Remote Graphics 4.2.0 User's Guide

appropriate senders. This software (based upon ALSA sound libraries and JACK-Audio-Connection-Kit libraries) must be built and installed on the target system as a part of the install.sh script. The install script assumes a supported set of ALSA sound libraries from HP or Red Hat Enterprise Linux (release 4 or greater) already exist on the platform. Only the JACK-Audio-Connection-Kit is built during install and it requires ALSA sound library support.

Note: The files contained within hp_rgs_4_audiosupport.tar.gz can also be built and configured for RPM package creation. See script rgs_audio_support for details.

5.The Receiver will be installed into /opt/hpremote/rgreceiver. To start the Receiver, execute the following command:

/opt/hpremote/rgreceiver/rgreceiver.sh

To start the Receiver in directory mode, execute the following command:

/opt/hpremote/rgreceiver/rgreceiver.sh -directory

6.Optionally, add the directory /opt/hpremote/rgreceiver to your PATH environment variable.

7.Refer to Installing & Enabling Remote Audio to complete the Receiver installation.

Installing the RGS Receiver for HP-UX

To install:

1.Login as root.

2.Insert the HP Remote Graphics Software CD and mount the CD.

3.Go to the mount point of the CD, which is usually /mnt/cdrom and change directories to hpux-pa/receiver.

4.Execute the following command:

./install.sh

5.The Receiver will be installed into /opt/hpremote/rgreceiver. To start the Receiver, execute the following command:

/opt/hpremote/rgreceiver/rgreceiver.sh

To start the Receiver in directory mode, execute the following command:

/opt/hpremote/rgreceiver/rgreceiver.sh -directory

6.Optionally, add the directory /opt/hpremote/rgreceiver to your PATH environment variable.

14