HP Remote Graphics 4.2.0 User's Guide

Browser Properties:Rgreceiver.Browser.IsMutable=bool

If set to "1", the name of the browser used to display online help, can be changed by the user in the Receiver Control panel. If set to "0", the name of the browser cannot be changed by the user. This can be used to permanently set the browser to be used before the RGS Receiver is started. This setting only applies to the Linux and HP-UX versions of the RGS Receiver. The default value is "1".

For Window's versions of the RGS Receiver, the default browser that is set in the Windows Registry is used to display the online help.

This property only applies to the Linux or HP-UX versions of the RGS Receiver.

Rgreceiver.Browser.Name=string

Use this property to set the name of the browser to be used to display online help. For example, setting Rgreceiver.Browser.Name=mozilla will start up the Mozilla browser when the "Help" button is selected in the Receiver Control Panel.

This property only applies to Linux or HP-UX versions of the RGS Receiver.

Hotkeys Properties:Rgreceiver.Hotkeys.IsMutable=bool

If set to "1", all Hotkey settings in the Receiver Control Panel will be able to be changed by the user. If set to "0", none of the settings can be changed by the user. This can be used to permanently enable or disable Hotkey settings before the RGS Receiver is started. The default value is "1" - Hotkeys can be configured by the user.

Rgreceiver.Hotkeys.SetupModeSequence=string

Defines the Setup Mode hotkey sequence. The sequence may only consist of Ctrl, Alt, Shift and Space keys. The sequence must also start with either a Ctrl, Alt or Shift key. The first key must also be held down through the entire hotkey sequence. The default value is "Shift Down, Space Down, Space Up".

Rgreceiver.Hotkeys.IsSendCtrlAltEndAsCtrlAltDeleteEnabled=bool

When enabled a Ctrl-Alt-Endkey sequence in the Remote Display Window is sent to the RGS Sender as a Ctrl-Alt-Delkey sequence. The default value is "1" - send a Ctrl-Alt-Delwhen the user enters Ctrl-Alt-End.

Rgreceiver.Hotkeys.IsSendFirstKeyInSequenceEnabled=bool

When enabled the first key in the hotkey sequence is sent to the RGS Sender. The default value is "0" - don't send the first key in the hotkey sequence.

ImageCodec Properties:

78