HP Blade Client Select sender, Network Options:

Using Remote Graphics Software

When the Receiver uses Directory Mode or Enterprise Service Mode with multiple Senders specified, the Select sender drop down box manages which system receives the active Remote USB connection. The example above shows a RGS Receiver setup for directory mode using the Directory File "directory.txt" and the system bl122 selected for Remote USB devices at the next connection.

NOTE: In Directory Mode or Enterprise Service Mode, Remote USB requires selection of one Sender system before connecting to any systems. Remote USB can only be enabled to one Sender at a time. During an active connection, if users want to change their Remote USB devices to another Sender system, they must

1.disconnect all systems using the "Disconnect All" button

2.use the "Select sender" box to select a new Remote USB system

3.reconnect to their remote systems using the "Connect All" button.

During device discovery, the new sender system will report the USB connection as a hotplug event for the Remote USB devices.

Network Options:

51