HP Remote Graphics 4.2.0 User's Guide

Creating Unattended Installers

Unattended installers can be created for the RGS Receiver and Sender for Windows. Unattended installers are useful when an enterprise needs to install RGS without user interaction.

Creating an Unattended Receiver Installer for Windows

The RGS Receiver installer is created using InstallShield and normally requires user interaction when run. To create unattended installers for the RGS Receiver install the RGS Receiver by creating an installation script with the following commands:

1.First install the RGS Receiver by running the Setup.exe for the RGS Receiver with the /r (record mode) and /f1 ("ef-one", alternative response filename) flags. For example:

Setup.exe /r /f1"C:/TEMP/ReceiverInstall.iss"

This creates the InstallShield response file ReceiverInstall.iss which can be used for unattended installs on other systems.

2.Install the RGS Receiver on other systems using the /s (silent mode) flag and the response file created in the previous step. For example:

Setup.exe /s /f1"C:/TEMP/ReceiverInstall.iss"

Creating an Unattended Sender Installer for Windows

The RGS Sender installer is created using InstallShield and normally requires user interaction when run. To create unattended installers for the RGS Sender install the RGS Sender by creating an installation script with the following commands:

1.Install the RGS Sender by running the Setup.exe for the RGS Sender with the /r (record mode) and /f1 ("ef-one", alternative response filename) flags. For example:

Setup.exe /r /f1"C:/TEMP/SenderInstall.iss"

This creates the InstallShield response file SenderInstall.iss which can be used for unattended installs on other systems.

2.Install the RGS Sender on other systems using the /s (silent mode) flag and the response file created in the previous step. For example:

Setup.exe /s /f1"C:/TEMP/SenderInstall.iss"

22