HP Distributed Cloud Networking manual Installation, Verification, Reboot XenServer

Block 2

Installation

Reboot XenServer.

Verification

After the XenServer comes up, in addition to the usual verification such as interface status, management network connectivity etc., perform the following verification checks:

1.Ensure that the bridge corresponding to HPManagedNetwork does not have any PIF attached to it.

[root@acs-ovs-3 ~]# ovs-vsctl show 016cccd2-9b63-46e1-85d1-f27eb9cf5e90 ~Snip~

Bridge "xapi0"

Controller "ctrl1"

target: "tcp:10.10.14.8:6633"

role: slave fail_mode: standalone Port "xapi0"

Interface "xapi0" type: internal

Bridge "xenbr0" fail_mode: standalone Port "eth0"

Interface "eth0" Port "xenbr0"

Interface "xenbr0" type: internal

Bridge "xenbr2" ~Snip~

2. Ensure that the hpManagedBridge bridges has the 'HP-managed' flag set:

[root@acs-ovs-3 ~]# ovs-vsctl list br xapi0

_uuid	: 7572d9d6-3f96-43d5-b820-fd865158057e
controller	: [ad89f1f6-fe5f-4e4e-8832-9816176878e8]
datapath_id	: "0000000000000001"
datapath_type	: ""
external_ids	: {}
fail_mode	: standalone
flood_vlans	: []
flow_tables	: {}
mirrors	: []
name	: "xapi0"
netflow	: []
other_config	: {datapath-id="0000000000000001", HP-
managed="true"}	: [8a9ff6ca-13cd-4036-b9e2-ca6b4e912d11]
ports
sflow	: []
status	: {}
stp_enable	: false

3.Ensure that hp-xenmonitor.py and HP_xenmon.py are running:

Clean Install on XenServer 55