HP Distributed Cloud Networking manual Hp Vsc, Update HP VSC configuration and reboot

Then click Next. A summary is displayed.

11.To close the summary, click Finish.

12.Before powering on the VM, add a serial port. Connect via Network, Network Backing to Server, Port URI to telnet://:2500 (this can be any port number).

13.Connect to the serial console of the TIMOS VM using a terminal application, such as PuTTY.

14.(Optional) Select one of the three boot options:

•HP VSC

•Update HP VSC configuration and reboot

•Update HP VSC configuration

If you do not make a choice within 20 seconds, the first option—HP VSC— is automatically selected and the VM boots from the vApp properties that you gave initially.

To boot up the VSC VM implementing the new information, use the second option—Update HP VSC configuration and reboot.

To make changes inside the VM before booting SROS, use the third option—Update HP VSC configuration. Instructions for making such changes are beyond the scope of this document. Do not make such changes unless you know what you are doing.

30 HP VSC Software Installation