1.Bring up a VM named myh1 using 24 GB RAM and 6 logical cores with the following commands:
#vsd_name=myh1
#vsd_disk=<TTY>/var/lib/libvirt/images/[xxx].qcow2
#
2.Repeat this step for each additional hypervisor, naming the additional vsd instances myh2, myh3, and myname.
Extract and Mount ISO Image
1.Extract the ISO disc image from the tar file to a temporary location.
2.Mount the ISO disc image from the temporary location to <TTY>/media/CDROM/ on each node.
Note: Ensure that the ISO is mounted to the same location on each node.
Configure Networking, DNS, and NTP
1.See Configure Networking.
2.See Configure DNS Server.
3.See Configure NTP Server.
Install HP VSD Using ISO
1. Install VSD on Node 1.
The install script checks for the XMPP proxy entry in your DNS. Run /media/CDROM/install.sh substituting your own XMPP server name.
[root@myh1 ~]# /media/CDROM/install.sh
V I R T U A L S E R V I C E S D I R E C T O R Y
(c) 2014 HP Networks
VSD supports two configurations:
1)HA, consisting of 2 redundant installs of VSD with an optional statistics server.
2)Standalone, where all services are installed on a single machine.
Is this a redundant (r) or standalone (s) installation [rs]? (default=s): r Is this install the first (1), second (2), third (3) or cluster name node (t) [123t]: 1
Please enter the fully qualified domain name (fqdn) for this node:
myh1.myd.example.com
Install VSD on the 1st HA node myh1.myd.example.com ...
What is the fully qualified domain name for the 2nd node of VSD:
myh2.myd.example.com
What is the fully qualified domain name for the 3rd node of VSD:
myh3.myd.example.com
What is the fully qualified domain name for the cluster name node of VSD:
myname.myd.example.com
What is the fully qualified domain name for the load balancer (if any)
HP VSD Installation Using QCow2 Image 19
