Validating and Cross-Validating with SYSGEN

Validate the Network Transport

Validate the Network Transport

The following procedure assumes that you have already configured and validated the Distributed Terminal Subsystem (DTS). The DTS must be validated before you can validate the network transport (Netxport) software. Upon configuring the selected screens for your network:

Step 1. Press the [Validate Netxport] key. Refer to the list of screens with the [Validate Netxport] key.

LAN, 100Base-T, or 100VG-AnyLAN — Figure 6-2

Token Ring — Figure 6-3

FDDI — Figure 6-4

Point-to-Point Shared Dial — Figure 7-5

Point-to-Point Direct Dial — Figure 7-6

X.25 — Figure 8-3

Gateway Half — Figure 9-2

Logging — Figure 13-2

Messages similar to the following ones will be displayed:

Searching for subsystem validation routine VALIDATEDTS

--->

Validation of

DTS/LINK started. <---

 

--->

Validation of

DTS/LINK finished. <---

 

NMMGR will now

cross-validate the NMCONFIG file with SYSGEN.

SYSGEN version

V.uu.ff : catalog version V.uu.ff

WED, NOV 15, 2000, 11:10 AM

Copyright 1987

Hewlett-Packard Co. All Rights Reserved.

**note** Retrieving NMMGR configuration data...

** First level command **

io

log (lo)

misc (mi)

spu (sp)

sysfile (sy)

 

 

 

basegroup (ba)

keep(ke)

permyes (pe)

show (sh)

tape (ta)

 

 

 

clear (cl)(c)

exit (ex)(e)

help (he)(h)

oclose (oc)

redo

 

 

 

sysgen> PERMYES ON

 

 

 

sysgen> BA CONFIG

 

 

 

sysgen> SY

 

 

 

148

Chapter 10