Configuring a LAN Node

Before using NMMGR to configure a link, you should complete the worksheets provided. See Chapter 4 , “Planning for Node Configuration,” for more information on planning your configuration and filling out the configuration worksheets.

This chapter includes step-by-step instructions to help you perform the following tasks:

•Begin the configuration process.

•Configure a LAN, Token Ring, FDDI, 100VG-AnyLAN, or 100Base-T network interface.

Once the above tasks are completed, refer to Chapter 10 , “Validating and Cross-Validating with SYSGEN,” for step-by-step instructions to help you perform the following validation tasks:

•Validate the network transport configuration.

•Cross-validate in SYSGEN.

90

Chapter 6