Configuring the Network Directory

Configure Path Report Data for a Node

Configure Path Report Data for a Node

The Network Directory Data screen (#10) in Figure 11-5is displayed when you press the [Add] or the [Modify] function key at the Select Node Name screen (#9) in Figure 11-4.

Figure 11-5 Network Directory Data

The function of this screen is to configure path report data for the node name listed at the top of the screen. One path report is configured for each NI on a node. Because the maximum number of NIs per node is 48 (including loopback), each node can contain as many as 47 path reports.

Step 1. Verify that the yes and no indicators in the TCP, Checksum for TCP required, and PXP fields are set correctly.

Step 2. In the IP address field, type in the IP address of the node listed in the Node name field.

Step 3. In the type field, enter the number that indicates the type of the path:

1 = IP

2 = LAN/IEEE 802.3 (LAN, 100VG, 100BT)

3 = X.25 ACCESS

5 = ETHERNET (LAN 100VG, 100BT)

6 = Token Ring, 100VG/IEEE 802.5

7 = FDDI

160

Chapter 11