Configuring the Network Directory

Configure Path Report Data for a Node

Additional address

A lower-level address, which depends on the type.

Type 1 does not contain lower-level addressing information. You can leave the field blank, or enter the keyword NONE.

Types 2, 5, 6, and 7 require the destination node’s station address, which is a string of six hexadecimal bytes, separated by dashes (XX-XX-XX-XX-XX-XX). The station address must correspond to the address configured on the remote node.

Type 3 requires an X.25 address key, which is an ASCII string of up to 15 characters. The X.25 address key must correspond to an X.25 address key entered in the NETXPORT.NI.NIname.PROTOCOL.X25.SVPATH or the NETXPORT.NI.NIname.PROTOCOL.X25.PVCPATH screen for the destination node.

Chapter 11

163