HP E3000 MPE/IX, E3000/IX Planning for Node Conﬁguration

4	Planning for Node Conﬁguration

This chapter describes how to complete node worksheets before you start conﬁguration. You will need to collect some information ahead of time to complete these tasks.

The main purpose of the node worksheets is to determine the information you will need to conﬁgure for each node during NMMGR’s guided conﬁguration. This information depends on the type of network you have. For a description of the ﬁelds in these worksheets, see Chapter 6 , “Conﬁguring a LAN Node,” for information on LAN, Token Ring, and FDDI, and Chapter 7 , “Conﬁguring a Point-to-Point Node,” for information on Point-to-Point and Chapter 8 , “Conﬁguring a X.25 Node,” for information on X.25.

It is recommended that you make copies of these worksheets and ﬁll in the parameter information, then use these worksheets to guide you through conﬁguration in NMMGR.

Node worksheets list only the ﬁelds you can conﬁgure during guided conﬁguration, which allows you to conﬁgure your nodes as quickly as possible. For information on conﬁguration parameters that are available through non-guided conﬁguration, see the NS 3000/iX NMMGR Screens Reference Manual.

This chapter includes:

•Node worksheet information.

—Node worksheet information.

—Token Ring conﬁguration worksheet

—FDDI conﬁguration worksheet.

—100VG-AnyLAN conﬁguration worksheet.

—100Base-T conﬁguration worksheet.

—Point-to-Point conﬁguration worksheet.

—X.25 conﬁguration worksheet.

—X.25 virtual circuit conﬁguration worksheet.

•Neighbor gateway worksheet information.

—Neighbor gateway conﬁguration worksheet.

•Neighbor gateway reachable networks worksheet Information.

—Neighbor gateway reachable networks conﬁguration worksheet.