Configuring a X.25 Node
Configure an X.25 Network Interface
| nodes per subnetwork you need. See |
| |
| details on deriving an IP subnet mask. |
Link Name | The link name identifies a specific |
| DTC/X.25 Network Access card to be |
| used for X.25 |
| connections. This link name must be |
| the same as the link name you entered |
| for this card when you configured your |
| DTCs. You may configure up to 11 |
| links. (One link must be used for |
| loopback. Loopback will be |
| automatically configured during the |
| guided screen configuration.) |
DTC Node Name | The DTC node name is the fully |
| qualified nodename |
| (name.domain.organization) of the |
| DTC that contains the DTC/X.25 |
| Network Access card with the |
| configured link name. |
Card Number | The DTC card number is the number of |
| the DTC/X.25 Network Access card in |
| the associated DTC. If the card is |
| contained in a DTC 48, the DTC card |
| number can be any number from 1 to 5. |
| If the card is contained in a DTC 16, |
| the card number must be 2. |
130 | Chapter 8 |