Configuring Logging
Enable Users for Individual Logging Classes
Enable Users for Individual Logging Classes
The logging screens described previously in this chapter make it possible to completely configure logging for all subsystems by traversing only seven screens. However, using these screens, it is not possible to configure logging so that messages generated by specific logging classes are sent to an individual user’s list device.
The following steps describe the method used to configure users to receive logging messages. Using this method, you can create a configuration that allows messages from a single logging class, or a set of classes, to be sent to a user’s list device.
To do so, you access and update the Logging Configuration Class Data screen (#67) in Figure
Figure
Step 1. Type the path name:
@LOGGING.SUBnnnn.CLASnnnn
in the command window of any screen and press the [ENTER] key, where SUBnnnn is the subsystem ID and CLASnnnn is the class name of the logging class you want directed to the user’s list device.
For example, subsystem 77, class 2 would be entered as:
@LOGGING.SUB0077.CLASS0002
184 | Chapter 13 |